Tiltform Sideform Shutters

SRB Systems Sideforms are developed for optimum functionality and efficiency.

All our sideforms are manufactured from structural grade aluminium extrusion making them strong and lightweight. This enables handling and installation to be a one man operation and eliminates the need for slow and cumbersome handling equipment. This results in substantial cost efficacy and productivity increases.

Our novel Centurion Sideforms / Edgeforms are a composite sideform incorporating interchangeable capping profiles. This enables sideform height adjustment up to 50 mm (2 inches) overall, in small 5 mm (¼ inch) increments, simply by snapping on a new capping profile on the standard height aluminium extrusion. Accordingly, a 150 mm (6 inch) sideform can increase in height to a 200 mm (8 inch) sideform, or to any size in between in 5 mm (¼ inch) increments.

This incredible adjustability eliminates the need to carry vast stock of costly varying size edgeforms and sideforms, which can in turn be replaced with stock of far more cost-effective varying polymer capping sizes and profiles.

All the capping profiles and sideforms are colour coded for size which greatly simplifies quality assurance procedures by allowing for visual checking of edgeform heights.

Not only can the sideform heights change, the chamfer profile can also be changed via varying chamfer profiles in the capping. The Centurion Edgeforms are epoxy powder coated to minimise concrete stick / adhesion and give better edge finish to the concrete.

  • Centurion Sideforms / Shuttering

    The Centurion Composite Sideform is a universal sideform that can be used for both Precast and Site Cast applications.

    The Centurion Sideform allows for capping to be snapped on both ends thus allowing for the sideform height to be increased by up to 25 mm (1 inch) on either end (i.e. a total of 50 mm (2 inches) increase in overall sideform height).

    This makes the Centurion an ideal sideform to use on fixed or hinged ends of a precast table because it eliminates the need to remove the fixed end sideforms in order to change panel thickness. Instead one can simply leave the sideform in place and replace the capping to accommodate changes in thickness of panels being cast.

  • Trojan Sideforms / Shuttering

    Coming soon.