- Home
- Sitecast
- Panelware System
- Sideforms / Shuttering
- Centurion
Centurion Sideforms / Shuttering
Centurion Adapters / Connectors
Centurion Bolt-on Clicker
The Centurion Bolt On Clicker plate is a simple engagement mechanism that allows the Centurion Sideform to be connected to different fixing or brace apparatus, as well as a number of other attachments and fitments.
The clicker is inserted into the rear of the sideform and turned clockwise to lock in position.
The clicker can easily move left or right along the rail (in the rear of the sideform) to the correct position simply by slightly rotating the clicker anti-clockwise. Rotation clockwise locks the clicker in place.
Spartan & Centurion Capping
The Spartan and Centurion Sideform Capping are made from a durable PVC Polymer and come in lengths of 5.8 m (19 ft).
The capping snaps onto the sideform / edgeform to form the chamfer profile and create the sideform overall height.
The range of chamfer profiles will increase into the future. Custom profiles and heights can be made to order relatively cost-efficiently. It is substantially more cost-effective to extrude a PVC profile to a specific height and chamfer edge profile to snap on to existing aluminium extrusion blanks than to manufacture and stock an entire new range of edgeforms.
The current profiles include:
12 mm x 12 mm Chamfer Edge in 00 (gives standard sideform height to aluminium Extrusions), + 5 mm, + 10 mm, + 15 mm, + 20 mm & + 25 mm height increments.
Square Edge Profile (no chamfer) in 00, + 5 mm, + 10 mm, + 15 mm, + 20 mm & + 25 mm height increments.
Centurion Aluminium Extrusion
The Centurion Sideform is made from high structural grade alumnium extrusion with high dimensional tolerance and accuracy.
The sideforms come in standard lengths of 5.8 m (19 ft) and heights of 125 mm (5 inch), 150 mm ( 6 inch), 175 mm (7 inch), 200 mm (8 inch).
The extrusions are epoxy powder coated with colour coding for sideform height.
Download SRB - Centurion Composite Sideform System.pdf (888KB)
Page 2 of 2