SRB Systems Home

The Trojan Sideform is designed for simple connection to the supporting mechanism (whether Precast Magnet Clamps or mechanical brace / support systems and brackets) via a spring loaded uni-bolt that locks into the rear ‘T’ slot in the Trojan Sideform.

Titan Slotted Magnet Adaptor / Connector Plate

The Trojan Sideform can be used in the precast application by connecting and securing the sideform to the Titan Magnet Clamp via the Titan Slotted Magnet Adaptor Plate.

The uni-bolt is inserted into the rear of the Trojan Sideform simply by rotating the uni-bolt in a clockwise direction inside the rail at the rear of the sideform. The spring loading on the uni-bolt keeps it in position in the T Slot in the rear of the Trojan Sideform.

The uni-bolt has a protruding thread that runs through the slotted hole in the side of the adaptor plate and is attached to the adaptor plate via a plastic knob.

The magnet clamp (with handles in disengaged position) is placed along the rear of the sideform and the uni-bolt turned clockwise, via the thread, locating it in the rear T Slot at the rear of the sideform.

When the sideform is adjusted to its correct location the magnet is first engaged to the casting table. Slight pressure is then exerted onto the top of the sideform to seal against the casting table and adaptor knob tightened firmly securing the uni-bolt and hence the sideform to the adaptor plate.

Ball Lock Rail Strip

The Trojan can be alternatively secured to the steel table in the same fashion as the Spartan Sideform via a Titan Magnet with a standard Titan Ball Lock Adaptor Plate.

Ball Lock Rail Strips are screw fixed to the rear of the Trojan Sideform at the required centres or spacings. These Ball Lock Rail Strips replicate the Ball Lock Rail Strip along the rear of the Spartan Sideform. This means the same Titan Adaptor Plate is used for two purposes:

• engaging and securing the Titan Magnet Clamp to the Trojan Sideform (with the Ball Lock Rail Strip)
• the Spartan Sideform.